Apr 08, 2022

Note for replacing lead-acid battery for lithium-ion battery

Leave a message

Many people want to change another lead-acid battery after the lead-acid battery is broken, but from the Internet, many users of lead-acid electric cars have changed lithium-ion batteries.Under the trend of curiosity, I began to study on lead acid and lithium batteries, and consulted with experts in this field.In the case of ensuring safety, found an old master with many years of maintenance related experience to replace.


Lead-acid battery replacement with lithium iron phosphate battery should pay attention to the following points.


1. The space problem of the battery

It is feasible to replace lead acid battery and lithium ion battery with the same capacity voltage, but to consider whether the size of the battery can still be installed in the original position, whether it is prominent or squeezed, because extrusion and damp will damage the battery internal short circuit phenomenon.


2. Must use the battery type of charger

Lead-acid batteries and lithium-ion batteries have the same capacity and voltage, so the charger cannot be used randomly, because the two batteries require unequal charging voltage and current in each stage.The charger voltage is high when the lead-acid battery is charged.And lithium ion battery technology requirements are high, so when charging, the charger uses constant flow and constant pressure charge, lead-acid lithium charging will lead to overcharge, there is a risk of explosion.


3. Socket replacement

Because the interface of lead acid battery and lithium ion battery is different, change the battery must use a matching socket, do not plug on the use, easy to lead to lithium ion battery short circuit, resulting in dangerous.


4. After changing the battery, it cannot be charged with the original charging port

Because of the different charging principle, if the original charging port on the electric car is used for charging, the circuit will be damaged and short circuit the lithium-ion battery.


5. After changing the battery, the controller is not replaced

Here also to mention, the replacement battery can only replace the same capacity of the same voltage, can not be replaced with the previous battery capacity voltage, which will burn out the controller, so that the motor hall and other electronic components damage.As long as it is consistent with the capacity and voltage of the original battery, there is no need to replace the controller.


With that said, let's start replacing the battery.


Today, the damaged lead-acid battery has been removed, according to the attention of the battery interface for the lithium-ion battery special interface.


The wiring is also connected by the mechanic according to the positive and negative poles, and the connection of the line is tightly wrapped up with electrical tape.


The socket was replaced with a T-word port for a lithium-ion battery to ensure that everything is safe after changing.


This is the protagonist of this time, G-tech lithium iron phosphate battery, and broken lead acid battery is the same capacity voltage, are 60V20Ah.


Put the battery in just right, not small, not prominent or squeezed (this proves that the money is enough, thank the boss)


Plug in the socket, everything is so just right, can let me forget the lead-acid battery.After changing the battery, the electric car was successfully resurrected, the power is the same as before, I hope the headlights and battery can be well together, do not "separate".


Send Inquiry